DI-16645 - Typ2 Sticker/Wallpaper
Code #16645
Expected delivery: 23–29 Oct · 30-day returns
Dinosaurus-Typ2 Sticker/Wallpaper
Popular Dinosaurus-Typ2 wallpaper at an unbeatable price. Stickers are not only for the wall - they can also be stuck on smooth surfaces such as doors, cupboards, mirrors, fridges or any other smooth surface. Anyone can apply wall stickers.
Specification:
- Package size: 50cm x 70cm
- Wallpaper size: The final design is up to you
- Material: PVC
- Marking: S3090
How to apply the sticker correctly?:
- 1.Preparing the sticker: roll out the sticker on a flat surface, preferably with a load of books on the table for at least 24 hours, or until it is thoroughly flattened so that it does not roll off on its own. If the sticker is not let flat enough, it will peel off.
- 2.Surface preparation: if you are sticking the sticker on the wall, make sure it is not dusty, cracked, greasy or peeling off. If you are sticking the sticker on a surface other than the wall, wipe and degrease it thoroughly with an alcohol-based product.
- 3.Sticker application: think about the layout of the sticker on your surface. If the sticker consists of several parts, glue them one piece at a time according to the design or your own imagination. If the sticker contains large parts, you need at least two people to glue the sticker together so that it does not stick together.
- 4.Finishing: after sticking all the parts, press them with the palm of your hand, we do not recommend rubbing the palm of your hand on the surface of the sticker, it may cause it to shift on the wall and then it might not stick anymore.
IMPORTANT!!!
| Material | PVC |
| Height | 50 cm |
| Width | 70 cm |
Customer reviews
No reviews yet
Be the first to write a review!
Questions & Answers
Have a question? Ask us.
No questions yet
Be the first to ask a question!
Safety (GPSR)
In accordance with Regulation (EU) 2023/988 on general product safety (GPSR), we provide the following information.
Product
Important safety notice for wallpapers and wall stickers in accordance with Regulation (EU) 2023/988 on general product safety (GPSR)
This is a targeted safety notice for the correct and safe use of wallpapers and wall stickers (including 3D soft PVC brick panels and children's growth charts). Due to the adhesives used, flammability of materials, possible fumes, and risk of detachment, it is essential to follow the instructions below to prevent injuries and damage.
Basic safety and handling principles
- Keep out of reach of children: There is a risk of suffocation by foil, swallowing small parts and torn pieces. The product is not a toy.
- Ventilation: Ventilate during and shortly after application; adhesives and PVC may temporarily release odors.
- Heat and fire: Do not place near heat sources, open flames, cooktops, radiators, or on very hot surfaces.
- Surfaces and substrate: Apply only to clean, dry, smooth, and solid walls; do not apply on damp, dusty, peeling, or freshly painted surfaces.
Proper and safe use
- Use as intended: Decorative cladding and interior decoration; 3D PVC panels provide limited impact cushioning and do not replace protective coverings.
- Compatibility test: Before full application, test on a small part of the wall; some paints, plasters, and wallpapers may be damaged or stained.
- Placement: Do not place within reach of cribs, beds, or areas with increased risk of pulling off. In bathrooms and kitchens, use only products with specified resistance to moisture and heat.
- Children’s growth charts: Self-adhesive “growth” charts are decorative; they do not guarantee accuracy for medical measurement.
Cleaning, maintenance, and storage
- Cleaning: Wipe with a soft dry or slightly damp cloth. Do not use solvents, alcohol, acetone, or abrasive agents.
- Maintenance: Regularly press down loose corners; replace damaged or cracked parts. Do not protect 3D PVC panels with sharp objects.
- Storage: Store flat in a dry and cool place; protect from bending, heat, and direct sunlight.
Specific warnings
- Wall damage: Removal may cause paint or wallpaper to peel off; remove slowly, possibly with gentle warming of the surface.
- Allergies and sensitive skin: If irritation occurs upon contact with adhesive, stop work and ventilate.
Disposal
- Safe disposal: Sort paper wallpapers according to local regulations; dispose of 3D PVC panels and films as plastic waste. Do not burn at home.
Incidents and contact
- In case of an incident (irritation, part falling off, wall damage), immediately stop using the product. Keep the product and proof of purchase for complaint processing.
Responsible person in the EU
Marček 80, 013 32 Svederník, Slovenská republika
Email: info@harahu.com
This information is provided in accordance with Regulation (EU) 2023/988 on general product safety. For more information about product safety, contact the manufacturer or responsible person.
